How to Measure a Box (11Lx8wx2h)

Sometimes, basic and the simplest things could look complicated. For example, if you want to measure a box, how do you ensure that you have used the right technique? Whether you want to fit something into the box or fit the box into another space, you should be aware of the measuring technique. If you know how to measure a box, you won’t be dependent on someone else to do the job for you. Whether it’s for professional or personal work, you must read further to know the details of measuring a box. All you require is a measuring tape or a ruler depending on the size of the box. Ensure that the scale has inches or centimeters displayed properly and that the numbers are not faded. You need to determine the length of each side of the box, the height, and the depth of the box. You must also measure the size of the things that must fit inside the box. There are three ways to measure a rectangle box.

1. Place the Box on a Flat Surface

Let's find out how to measure a box and take one step at a time. Start by placing the box on a flat surface. Make sure the open-ended side of the box faces the top. Bring measuring tapes or other standardized rulers that have inches and centimeters on them. Also, try to keep a pen or a pencil handy to write down the measurements as you may tend to forget and get it all wrong in the end. Use either inches or centimeters, whatever you are comfortable with and also depending on the size of your box.

2. Measure the Box from the Inside

If you want to find out if another thing will fit into your box, you need to measure it from the inside. First, take your measuring tape and stick one end of the tape at a corner, and then straighten out the other end and check the measurement. If it’s a rectangular box, the other length will be the same. Measure the length and width in this manner first and then move to the depth of the box. To measure the depth of the box, first press the tape measure into the bottom of the box and stretch the other end towards the open end of the box. Make sure the tape is not creasing out and then record the number that meets the open end of the box.

3. Measure the Box from the Outside

If the walls of your box are thick, the measurements from the outside will vary from the inside. Start with the length by placing the zero end of the measuring tape against one corner of the box and then stretch out the other end. Record the length and do the same for the width as well. If it’s a square box, then all the measurements should ideally be equal. But, for a rectangular box, the length, width, and depth may vary. Record all the measurements and keep them with you for further reference.